Camera online

Camera online

Goodbye free radicals, hello healthy body – Boulder Daily Camera

The C-60 of Greska

Bob greska

Some people call it “electrons in a bottle”. Greska’s carbon 60 contains 60 carbon atoms – an ingredient commonly referred to as C60, carbon 60, or fullerene. Carbon 60 stabilizes the imbalanced molecules in your body, these imbalanced molecules (free radicals) cause inflammation, fatigue, muscle stiffness and many other problems in the body. Scientists believe that C60 exhibits unique antioxidant properties. Antioxidants help stabilize free radicals – molecules notoriously linked to aging and diseases such as heart disease and visual impairment. Greska Carbon 60 contains over 100 billion Carbon 60 molecules per serving. It’s black and tasteless. Just carbon 60 and organic sunflower oil. But what does this mean and what can carbon 60 do for you? Let’s take a step back, however, and find out more about the man behind the product that helps boost the body’s immunity and ability to heal itself.

“From my childhood I could see the level of the microscope in my mind,” says Bob Greska. “I’ve been an inventor my whole life. Bob remembers testing his science teacher’s claim that gravity and mass attract each other at the age of 8.

At home, he hung two lead weights on ropes from the ceiling and, of course, the mace kept them closer together at the bottom. As for his love of science, Bob was off for the races. After studying materials science, specifically carbon, Bob worked for Lockheed Missile and Space as a process engineer to oversee the fabrication of the ceramic billets used for the Space Shuttle Columbia’s re-entry heat shield tiles. . Then came a move to Littleton to provide materials engineering support for carbon fiber spacecraft structures at Martin Marietta Aerospace. He provided design support for the Boeing 767 aircraft engine nacelle. He worked on the Venus Magellan probe and the maneuvering unit. Yes, the space backpack. Bob specified, coordinated and supervised the testing of critical components of the Carbon spacecraft for special programs. He was the “point man” of materials genius at NASA. His list of accomplishments is too long for this article, but suffice it to say that he invented everything from robot arms to glass chucks and hyperbaric chambers to energy return crutches. So how did it go from braiding carbon to using it to restore body health?

Having worked with carbon for 40 years, Greska knew he had applications for magnets and as a lubricating additive for engine oil. “I think I know how to do this,” he thought once in typical Bob fashion. In the lab he went and over the next two years he developed and refined a method to create food grade carbon 60 without solvents. He didn’t yet know how positive his C-60 would be for the human body, but he was about to find out.

Greska’s C-60 is clean and incredibly bioavailable, giving it tremendous toxin-fighting power at the cellular level. When molecules in the body lack electrons, they do not function properly and are prone to poisoning, which makes you sick. This is where C-60 works, donating electrons to molecules that lack one. With these completely new molecules, the body can heal itself. A free radical toxin is a real electron thief, but it cannot resist the electron offered by C-60, which neutralizes and stabilizes it so that it cannot do more damage.

The C-60 of GreskaWho benefits from using the Greska C-60?
“Older people see a great benefit in using it,” says Greska. “After four days, almost anyone can feel a lot more energy in their body and clarity of mind. Unlike most things that sound too good to be true, Greska’s C-60 promotes reduced inflammation, healthy joints, athletic performance, healthy aging, increased energy, and mental health. Testimonies of his kindness abound, as you will find by reading the reviews at Greska’s C-60 is a super detoxifier.

One serving is one-eighth of a teaspoon. Carbon particles are 200,000 times smaller than antioxidants in food, so their mobility is unmatched. This carbon penetrates cell walls, donating electrons to molecules that must be complete again, doing an incredible job of restoration.

Greska Carbon 60 takes advantage of blending the benefits of sunflower oil into its carbon 60 product. Sunflower oil contains vitamins E, A, C and D. Unlike olive oil, sunflower oil contains vitamins E, A, C and D. Sunflower oil is beneficial for the skin, can help regenerate new skin cells, reduce wrinkles, and help your skin get rid of acne-causing bacteria. Vitamin E and oleic acid in sunflower oil, together with the benefits of carbon 60, can help protect the skin’s collagen and elastin, reduce the appearance of fine lines on the face, and prevent damage caused by UV. Astonishing!

Bob Greska and his team invite you to try a seven-day trial for just $ 12, shipped for free. Can Carbon 60 Really Help You Clear Your Mind, Improve Your Health, And Keep You From Getting Sick?

There is only one way to find out. Call 720.600.6040 or go online at

* Disclaimer: Greska’s Carbon-60TM or Carbon 60, Inc. makes no health claims regarding its product: Greska’s Carbon-60. Carbon-60TM from Greska has purchased this advertising space for informational purposes only and should not be taken as medical advice or instruction. Greska believes that all information, statements, suggestions and product descriptions for this product are correct and correct. These statements have not been evaluated by the Food and Drug Administration. These products are not intended to diagnose, treat, cure or prevent any disease. Consult your doctor or health care provider for medical advice. Liability for Greska’s Carbon-60TM or Carbon 60, Inc .: Greska’s Carbon-60TM or Carbon 60, Inc. limits its liability to the amount of the purchase price of its product. By using the product, you accept and accept the limits of its liability. All wholesale, bulk and private label orders are made at the FOB shipping point (onboard freight shipping point).

Source link

read more
Camera online

GovQA’s Flexible Case Processing Technologies Can Help Maryland Agencies Prepare for Proposed Body Camera Legislation

Copyright 2021 PR Newswire. All rights reserved

FORT WASHINGTON, Maryland., July 9, 2021 / PRNewswire / – Maryland Joins Growing List of States Across The Nation That Have Passed Legislation To Equip Officers In All Its Police Departments With Body Cameras And Are Struggling With The Downside Costs Of Storage, Review And Distribution images, according to GovQA. GovQA’s public recordings request management software processes more FOIA (Freedom of Information Act) requests for state and local governments than any other software vendor, including body camera video editing through Veritone Redact integration .

“The biggest challenge with the obligation of a body camera for each Maryland police officer by 2025 will be the resources to comply with the volume and complexity of information that must be reviewed, redacted and approved before it is released, ”said Jennifer snyder, Chief Evangelist at GovQA.

A representative from GovQA will attend the 2021 National Association of Counties (NACo) Annual Conference and Exhibition (#NACoANN) in Prince George County, Maryland, to answer questions about the company’s automated solutions for processing public registration requests at booth # 117.

The requirements for body cameras within law enforcement agencies are increasing rapidly. The number of law enforcement agencies adopting body camera programs is estimated to have more than doubled between 2013 and 2018 in United States.

GovQA, along with Veritone and other major technology partners, will offer a free webinar on August 24, 2021, at 2:00 p.m. EDT Show how public safety agencies can take a proactive approach to automate their public record management process and draft requested audio / video files, while remaining compliant in a secure cloud environment. Prior registration is recommended.

The webinar is open to (and the information presented will apply to) participants from all 50 states. The webinar is particularly relevant for agencies in Maryland, Connecticut, Pennsylvania, new York, Rhode Island, Vermont, New Hampshire, and Maine who have recently passed or have pending police reform legislation that has a direct impact on public records / FOIA.

GovQA is the only SaaS-based public folder management platform capable of securing end-to-end public folder disclosure workflows for any type of document, including electronic documents, videos and audio files. Through its strategic relationship with Veritone, creator of the world’s first operating system for artificial intelligence, aiWARE ™, GovQA customers are able to automate the writing of sensitive information within video and audio evidence up to ‘90% faster than manual methods.

“Police departments that proactively prepare for the state’s body camera mandate will fare much better than those that don’t,” Snyder said. Visit or contact us here to learn more.

About GovQA

GovQA is the leading provider of cloud-based SaaS automated workflow solutions for government compliance. Customers use GovQA software to more easily process and manage public records and inquiries from citizens, media and other government offices. With 20 years of experience, GovQA combines reliable tools and security, proven government expertise, and a scalable platform that enables cities, counties and state agencies to securely collect and control sensitive information. time within, between and outside governments. Visit for more information.

Media contact:

Patrick mclaughlin, Markit Strategies & PR for GovQA

[email protected]


Related images


View original content to download multimedia: -legislation -301328860.html


Source link

read more
Camera online

Cam-Tel will provide gigabit internet speed

CAMDEN – Cam-Tel is modernizing its network and distribution systems with the goal of delivering gigabit speed to homes and businesses in its service area, according to a press release.

Service has been enhanced in each of Cablelynx’s residential and commercial broadband service plans. Now speeds of up to 250 megabits per second are available, allowing for much faster service.

Additional builds will begin in early 2022 to provide gigabit speeds in all areas where Cam-Tel offers service. Gigabit service will be available to all residents and businesses in Camden when the project is completed.

The total cost will rise to more than $ 1 million, Cam-Tel said.

“These are exciting times for the Camden area. There aren’t many cities or towns in America that offer Gig service to all of their residents,” said Stacy Eads, regional manager of Cam-Tel Company.

“We have continually invested and improved our cable system and now this new million dollar project adds to the company’s existing fiber optic infrastructure and expands Cablelynx’s broadband service,” said Walter E. Hussman, Jr., president of WEHCO Media, the parent company. from Cam-Tel Company and Camden News. “Residential subscribers will also be offered more options for their Internet service to meet the growing demands of home work and home schooling demands placed upon them.”

Source link

read more
Camera online

Man charged in attack on police, AP photographer at Capitol

COLLEGE PARK, Md. (AP) – A Pennsylvania man was arrested Wednesday on charges that he assaulted an Associated Press photographer and police officers during the Jan. 6 riot at the US Capitol.

Alan William Byerly, 54, was armed with what appeared to be a stun gun when he charged at officers guarding the Capitol, an FBI agent wrote in an affidavit. After police apparently removed the device from his hand, Byerly continued to charge at the officers, punching or pushing at least three of them, and tried to grab an officer’s baton, the agent wrote.

Officers managed to restrain Byerly, but a fellow rioter helped him escape, the FBI said. Police recovered the stun gun that he apparently wielded.

Body camera footage captured Byerly assaulting three Metropolitan Police Department officers, according to the affidavit.

Byerly also is accused of attacking an AP photographer who was wearing a helmet-style gas mask and a lanyard with Associated Press lettering.

A photo shows Byerly standing behind a group of people who pulled the photographer backward down a set of stairs leading up to the western front of the Capitol building, the affidavit says. At the bottom of the stairs, Byerly and three other people grabbed the photographer and pushed, shoved and dragged him toward the site of the original altercation, the agent wrote.

“It is deeply troubling when journalists are targeted for simply doing their jobs,” AP media relations manager Patrick Maks said in a statement Wednesday. “These charges are an encouraging sign that those who attacked journalists on Jan. 6 will be held accountable. ”

A federal magistrate in Allentown, Pennsylvania, ordered Byerly to be jailed pending a detention hearing on Monday. Court records don’t list a defense attorney for him.

The charges against Byerly in a June 25 complaint include assaulting a federal officer, obstruction of law enforcement during civil disorder and violent entry and disorderly conduct on Capitol grounds.

The AP reported last week that the fence erected around the Capitol after the insurrection is expected to be removed as early as Friday, weather permitting. The US Capitol Police said the temporary fencing can be reinstalled quickly, if necessary. Building restrictions remain in effect.

Law enforcement officials have been particularly concerned about the potential for violence from right-wing extremist groups and those who believe in conspiracies and follow election-related information online. Officials have been tracking chatter online about groups of people potentially returning to Washington as part of an unfounded and baseless conspiracy theory that former President Donald Trump would be reinstated in August, two officials familiar with the matter told the AP.

Investigators have also been seeing an increased number of threats being made against lawmakers in Congress related to the Jan. 6 insurrection, the subsequent congressional investigations and the House committee to investigate the insurrection, the officials said. The officials could not discuss the ongoing investigations publicly and spoke to the AP on condition of anonymity.

More than 520 people have been charged with federal crimes related to the riots in the six months since the siege. More than 100 defendants have been charged with assaulting police officers. Others have been charged in the destruction of camera equipment belonging to journalists covering the riot, including an AP video crew.

An Illinois man arrested on June 24 was the first defendant charged with assaulting a member of the news media during the riot, according to the Justice Department. Shane Jason Woods, 43, is accused of tackling a cameraman, causing him to fall and drop his camera, according to an FBI agent’s affidavit.

Footage of the riot showed Byerly wearing a gray “Kutztown” beanie, a neon yellow “safety” long-sleeve shirt under a black jacket, a striped face covering and a black backpack. Byerly lives in Fleetwood, Pennsylvania, which is roughly 5 miles (8 kilometers) from the city of Kutztown, the affidavit says,

A tipster who called the FBI in April identified Byerly as one of the suspects captured in riot photos. The caller said Byerly frequents a Fleetwood business where the caller works. Byerly told a friend that he was waiting to be arrested because he knew that his picture had been publicized, the caller said.

Cellphone records showed that Byerly’s phone was in Washington, DC, on Jan. 6, the FBI said.


Associated Press writers Lisa Mascaro and Michael Balsamo in Washington contributed to this report.

Copyright 2021 The Associated Press. All rights reserved.

Source link

read more
Camera online

Huawei nova 8i announced with Snapdragon 662, 64MP quad camera and 66W load

Huawei’s nova 8 series includes a total of four smartphones – nova 8 5G, nova 8 Pro 4G, nova 8 Pro 5G and nova 8 SE. That number drops to five today as the company added a new member to the range – nova 8i.

The nova 8i sports a 6.67 “FullHD + LCD display billed as a” borderless display “by Huawei, which is surrounded by 1.3mm bezels on the left and right sides and a 1.35mm bezel. The screen also has a pill shape cutout in the upper left corner housing the 16MP selfie camera.

The rear panel of the Huawei nova 8i houses four cameras inside a circular island. The configuration consists of 64MP main sensor, 8MP ultralarge, 2MP macro, and 2MP depth sensor units. Huawei claims that the back cover has a 4D curvature that “offers precision-crafted rounded edges, for an ultra-smooth feel.”

Huawei nova 8i announced with Snapdragon 662, 64MP quad camera and 66W load

Under the hood, the Huawei nova 8i has a Snapdragon 662 SoC with 6 GB / 8 GB of RAM and 128 GB of storage. And on the software side, you get Android 10 with EMUI 11 instead of Android 11.

The nova 8i also has a side-mounted fingerprint reader and powers the entire package with a 4,300mAh battery, which should go from flat to 60% in 17 minutes and fully charge in 38 minutes with the 66 W charger supplied.

Huawei nova 8i
Huawei nova 8i
Huawei nova 8i

Huawei nova 8i

The Huawei nova 8i is available in Moonlight Silver, Interstellar Blue and Starry Black colors and is for pre-order in Malaysia in an 8GB / 128GB configuration for MYR 1,299 through the company’s online store.


Source link

read more
Camera online

SC finalizing rules on body cameras – spokesperson

The Supreme Court (SC) is finalizing the rules on the use of body cameras in law enforcement operations, SC spokesperson Brian Keith Hosaka said on Tuesday.

“The Tribunal En Banc has not yet published the said rules. The same is still being finalized by the judges, ”Hosaka said in a message to reporters.

Hosaka’s statement comes after Chief Justice Alexander Gesmundo announced ahead of the swearing-in of new officers of the Integrated Bar of the Philippines (IBP) earlier today that the court has already promulgated the rules, which will apply to arrests and searches ordered by the court. mandates.

Last week, Gesmundo said the court, in crafting body-worn camera rules, sought a balance between protecting an individual’s constitutional rights to arrest, search and seize, and guarantee of operational requirements unimpeded by law enforcement.

“We try to achieve this balance so that the end goal is not to disregard the constitutional rights of individuals, but at the same time, law enforcement agencies also have sufficient leeway to effectively discharge of their duties, “he said.

The senior magistrate said the court would make an agreement with the Judicial Academy of the Philippines, the judicial education arm of the SC, to provide training for all those involved in the implementation of these rules.

The Philippine National Police (PNP) last month launched the body camera system to ensure transparency and legitimacy in law enforcement operations.—AOL, GMA News

Source link

read more
Camera online

Cam Davis wins Rocket Mortgage Classic on 5th hole of playoffs

DETROIT (AP) – Cam Davis landed a 50-foot sand shot on the 71st regulation hole and it propelled him into a five-hole playoff where he outlasted Troy Merritt and Joaquin Niemann to win the Rocket Mortgage Classic for his first victory on the PGA Tour. .

“That’s the only reason I’m sitting here now,” Davis said at a press conference beside the trophy. “To be honest, in my head, I hadn’t thought of trying to punch him.”

Davis ultimately won when Merritt missed a 6-foot putt on the fifth hole of the playoffs.

Davis missed putts to win every hole in the playoffs, but kept his cool because he knew good shots set up putts he just missed.

The 26-year-old Aussie left 6 and 18-foot high putts, a 25-foot low putt and a 19-foot high. He misinterpreted a break on a 12-foot putt on the fifth hole of the playoffs and settled for a par, then won when Merritt bogeyed.

“I just tried to get out of it as much as I could and hit every shot for what it was worth,” Davis said. “As simple as that said, it’s so hard to do when the pressure is like that. I just kept putting good swings on it.

“I guess I didn’t put any putt, but I kept putting it in play, so it worked out well.”

Davis finished under 67 to tie Merritt (68) and Niemann (68) under 270 at Detroit Golf Club. Niemann left the playoffs with a bugy on the first extra hole, his first buggy of the week.

“It’s hard to be here knowing there are playoffs going on right now,” Niemann told reporters.

Niemann had a chance to win it at the 72nd hole, but left a 17-foot-high putt.

“I should have won this tournament, but I mean, that’s what it is,” Niemann said. “I’m going to go get some rest next week and try to do my best for the (British) Open and the Olympics.”

Niemann had two shots that went 569 yards to 17 yards and he had two 14-foot putts to take the lead at 18 yards, but he quickly had company.

Merritt, who was in the last group with Niemann, birdied his fourth out of five holes to share the lead at 17.

Davis joined the leaders with the eagle-birdie finish.

“I’ve been in good positions before, but playing the golf I played on the home stretch was just great,” said Davis, who entered the tournament with four top 10 finishes over the last few years. last two years.

Merritt, 35, was aiming for his third PGA Tour victory and his first since 2018. He has been in contention lately, but he has failed.

“It’s been a good couple two months, four top 10s, now a great end this week,” he said. “I just hope for this victory. We’re knocking on the door.”

Niemann, 22, shared the lead in the second and third rounds and finished second for the third time, including eliminating the Sentry Tournament of Champions playoffs.

Last week at the Travelers Championship, Harris English beat Kramer Hickok in an eight-hole playoff that tied the second longest sudden death in PGA Tour history. Hickock stayed on to watch the playoffs in Detroit after finishing 6 under.

Alex Noren (64) had a share of the lead at 17. He got out of the heat and humidity but planned to leave the cozy clubhouse as soon as someone got ahead of him and it happened with a trio of competitors. Noren is tied for fourth with Hank Lebioda (68).

Bubba Watson climbed the rankings earlier in the scorching hot afternoon with a 64 to put him at 16 under. This briefly gave him a share of the lead, and he was tied for sixth with Brandon Hagy (68).


Follow Larry Lage on


More AP golf: and

Source link

read more
Camera online

Design and machining of micro-mold tools

CAD / CAM software The software turns innovative ideas into reality: design and machining of micro-mold tools

Publisher: Alexander Stark

Germany – Imagine a zipper 15,000 kilometers long – that’s the quantity of this ingenious mechanism, Heiligenstädhter Reisverschluß produced in 2020 alone. To maintain its pace of innovation, the company uses modern CAD / CAM software provided by German software manufacturer Schott Systeme.

Related companies

Bernd Kellner – Design and development of PK0 products using CAD / CAM software Pictures by PC

(Source: Schott System)

Founded in 1992, Heiligenstädter Reißverschluß dates back to the 1870s. The company has accumulated experience in the development and production of zippers since 1935. With around 100 employees, the renowned manufacturer produces for a wide range of applications which ranges from zippers for clothing, upholstery, outdoor gear (sleeping bags, tents and tarps) to special flame retardant, water repellent and UV absorbent designs.

In 2002, the Heilgenstadt-based company company implemented CAD / CAM Pictures software by PC from Schott Systeme as a central system for product development and production. Since that time the software has been at the heart of the acceleration of product innovations.

Innovation in plastic zippers

From July 2021, PK0 plastic zippers will be mass produced. here are the the smallest zippers the company has developed to date and are specially designed for baby and children’s clothing. Made from polyoxymethylene POM plastics for extreme durability and flexibility, the teeth are injected directly onto the surrounding textile tape. Since it is made of plastic, an endless array of color combinations can be offered, from strap to base color, including new glow-in-the-dark variants (ideal for matching the product with fashionable clothing) .

From planning to production of tools to series production, we rely on a single software solution.

Bernd kellner

As with all products from Heiligenstädter Reißverschluß, the CAD / CAM software Pictures by PC is a central part of all product design and development, including the design and machining of molding tools and electrodes. . Bernd Kellner, Head of Technical Development, explains: “The open structure of the system and the a wide range of well-thought-out 3D modeling possibilities offers great advantages when designing. In particular, adding sketches and photos and importing external files leaves nothing to be desired.

PK0 injection molding tool designed and machined with pictures by PC
PK0 injection molding tool designed and machined with pictures by PC

(Source: Schott System)

Even using the latest CAD / CAM software, the entire design and development process of the PK0 series took 18 months. The zipper must meet high standards, and the transverse resistance is particularly important. the the zipper must withstand a force of 200 Newtons over a length of one inch (about 25 mm). The final production mold designed using Pictures by PC includes a smart sliding section that can be swapped into shape either the start, middle and end sections of the zipper, allowing continuous molding regardless of the length of the zipper.

Precision machining of molds and electrodes

In the past, their Mazak milling machines were programmed manually. Pictures by PC was purchased in 2002 to modernize manufacturing methods. With increasingly complex products, such as the PK0 zipper, Schott Systeme’s advanced machining strategies such as high performance trochoidal cutting (HPC) and high speed finishing (HSC) are essential for optimum cutting of hard tool steels and copper electrodes, with Kellner explaining: “Without good CAD / CAM software as with Pictures by PC, the increasingly complex construction and mold making processes are no longer. possible ”.

Each tooth is 2mm wide, 3mm long and 2.4mm high. The smallest corner radius on the tooth is tiny 0.1mm, the space between the studs being approx. 0.9 mm. Using the milling strategies developed by Schott Systeme, precise molds and electrodes were machined from hard materials using tools as small as 0.2mm in diameter.

PK0 electrode with a 1 cent coin
PK0 electrode with a 1 cent coin

(Source: Schott System)

One of the main strengths of the Heiligenstadt-based company is its ability to manufacture zippers and grip plates to exact customer requirements, such as logos and letters (company trademark). the flexible management of custom graphics is facilitated with the 2D vector graphics tools of Pictures by PC as well as the import of various other graphic formats (Adobe Illustrator, Corel Draw, WMF clipart, bitmap vectorization). Composition and manipulation (Truetype, Postscript) also meet the highest typographical requirements (Kerning, Editing, Unicode). the machining of personalized 2D customer branding directly on 3D molds and electrodes is facilitated by the industrial engraving and sculpting tool paths generated by Pictures by PC. Kellner specifies: “The seamless transition to CAM module offers great advantages, especially in lettering. This allows us to project logos and letters onto free-form surfaces without any problems and thus milling and engraving the electrodes for the insertion of the mold inserts. A great advantage of the CAM module is the many machining strategies available as standard. “

Award-winning miniature mold design

The additional competence of Heiligenstädter Reißverschluß in the manufacture of innovative precision molds was once again confirmed by the receipt of the Zinc Die Casting Prize 2020 at Euroguss exhibition in Nuremberg. Their award-winning “suitcase” of castings was a decorative case in die-cast zinc designed for a special series of collectible wooden figures. Necessary to be an exact scale replica, the case (measuring 20 x 14 x 7.5mm) included extra fine details, such as the corners of the case, which when collapsed resulted in the body of the case protruding. only 0.2mm case.

Zinc Die Casting Prize at Euroguss 2020 - «Suitcase"
Zinc Die Casting Prize at Euroguss 2020 – “Suitcase” ”

(Source: Schott System)

In order to throw such undercut details without imprint marks, the company used its Pictures by PC software to design a smart solution of tilted ejectors that both formed and ejected the undercut regions of the corners of the case, completely eliminating the need for mechanical sliders. the high precision of image processing by PC and resulting surface finish (galvanized gold-plated) were compared at the judgment to “a watchmaker’s work”, with Kellner’s comment: “The cast shows impressively that even the smallest quantities are attractive for die casting zinc. We machine everything in-house using our CAM Pictures by PC software, including milling mold cores and ejectors.

Commenting on their 20-year partnership with the software company, Kellner sums it up: “The free support from Schott Systeme is particularly noteworthy, and since they are the true maker of the software, any questions or issues we have are answered promptly. The large number of standard post-processors available and the trouble-free adaptation should also be mentioned – software is the cornerstone of our success.

(Ref: 47491252)

Source link

read more
Camera online

Samsung Galaxy Z Fold 3 Surface camera details online, spotted with Snapdragon 888 on Geekbench

Information about the Samsung Galaxy Z Fold 3’s camera was leaked by an informant on Twitter. According to the information available, the foldable smartphone will have a total of five cameras – three on the back, one on the unfolded screen and one on the secondary screen. Meanwhile, the purported US version of the handset was spotted on Geekbench along with the Qualcomm Snapdragon 888 SoC. The phone is expected to debut in India sometime in August and has been leaked in various renderings.

The first set of information comes from tipster Tron who tweeted that the Samsung Galaxy Z Fold 3 will come with five cameras. The Samsung phone’s triple rear camera setup is expected to feature a 12-megapixel Sony IMX555 main sensor, a 12-megapixel telephoto lens with 2x zoom, and a third 12-megapixel snapper with an ultra-wide-angle lens. The camera on the outer screen, when the phone is folded, is said to have a 10-megapixel sensor. The front camera that would be located under the main screen would have a 16 megapixel Sony IMX471 sensor with 1.0 micron pixels.

In related news, the US model of the handset was reportedly spotted on Geekbench’s website. According to a listing on the benchmarking website, a smartphone with model number SM-F926U – believed to be the Samsung Galaxy Z Fold 3 – has been spotted with the Qualcomm Snapdragon 888 SoC under the hood. A smartphone with the same model number had previously been spotted on the US Federal Communications Commission (FCC) certification site. Additionally, the phone is seen with 12 GB of RAM and runs Android 11. It scored 1,124 points in the single-core test and 3,350 points in the multi-core tests.

A previous report stated that the Samsung Galaxy Z Fold 3 would be available in three shades: black, gradient pink, and navy green. All of these shades appear to have a matte finish. The phone is expected to launch in India in the second week of August.

Source link

read more
Camera online

Dounreay graduates create online work experience

Due to COVID-19 restrictions, Dounreay has been unable to offer local high school students their normal week of work experience this year. But a group of apprentices and graduates came together to create a virtual experience instead with help from the internal training and development team, Speakers for School, and other operating companies in the area. NDA.

The sessions were well attended with students from as far away as London and Derby. The program included the planning and construction of a hypothetical low-level waste facility with students taking on the roles of engineers, safety advisers, waste operators and more.

The final activity was to make a model of the waste facility and the participants really threw away everything they had learned during the construction, with Kian winning the top prize.

Julia Massey, regional speaker manager for schools, said:

“The young project team has masterfully put together a well-structured, high-impact program delivered to the next generation of nuclear engineers. “The session really helped build student confidence. By the end of week 4, students were engaging both verbally and with cameras on – no small feat. “

The NDA now hopes that this program can be repeated for other students at other NDA sites.

NDA People Strategy Implementation Manager Codie Barnes said:

“The Dounreay team went to extraordinary lengths to ensure the success of the event. It was a pleasure to partner with Dounreay and Speakers for School to develop a virtual work experience opportunity for young people… they created something really special that I hope we can use in the rest of the NDA group. .

Source link

read more
1 3 4 5 6 7
Page 5 of 7